Diamant stones with a bore
Diamant is used for the rectification of:
- tungsten carbide
- carbon
- graphite
- ferroceramic
- glass
- reinforced plastic
- quartz and steel
- super-alloys of more than 60 RC.
Mounting:
directly on the axe of your machines of on machines for shaft mounted tools with our mandrels
directly on the axe of your machines of on machines for shaft mounted tools with our mandrels
- L50/101 with a shaft of 6 mm for stones with a bore of 6 mm
- L50/103 with a shaft of 6 mm for stones with a bore of 10 mm.
Using speed:
between 15 and 30 m/sec. following the possibilities of your equipment.
Lubrication:
always preferable to increause the service life, the cutting capacity and the state of the surface.
Grits:
between 15 and 30 m/sec. following the possibilities of your equipment.
Lubrication:
always preferable to increause the service life, the cutting capacity and the state of the surface.
Grits:
- 064: grits of 63 up to 53 microns
- 070: grits of 69 up to 58 microns
- 100: grits of 98 up to 88 microns
- 107: grits of 106 up to 90 microns
uniformly divided and fixed by a layer of nickel.
Diamond stones with a bore
| Article Nb. | Dimensions (mm) | Bore (mm) | Grid | Min. Qty | |
|---|---|---|---|---|---|
| N03/537 | Ø 16 x 10 | 6 | D100 medium | 5 | |
| N03/539 | Ø 16 x 10 | 6 | D70 fine | 5 | |
| N03/547 | Ø 20 x 10 | 6 | D100 medium | 5 | |
| N03/549 | Ø 20 x 10 | 6 | D70 fine | 5 | |
| N03/557 | Ø 25 x 10 | 6 | D100 medium | 5 | |
| N03/559 | Ø 25 x 10 | 6 | D70 fine | 5 | |
| N03/567 | Ø 30 x 10 | 10 | D100 medium | 5 | |
| N03/569 | Ø 30 x 10 | 10 | D70 fine | 5 | |
| N03/577 | Ø 40 x 10 | 10 | D100 medium | 5 | |
| N03/579 | Ø 40 x 10 | 10 | D70 fine | 5 |
