Grinding caps
The abrasive grinding caps with a round and/or pointed nose are very much appreciated for all deburring "on top" whenever the shape of the piece does not permit a radial use of the abrasive tool.
Grinding caps
| Article Nb. | Dimensions (mm) | Grid | Max. r/min | Min. Qty | Shape | |
|---|---|---|---|---|---|---|
| L04/005 | Ø 5 x 11 | 80 | 30.000 | 50 | bout rond | |
| L04/006 | Ø 5 x 11 | 150 | 30.000 | 50 | bout rond | |
| L04/007 | Ø 3 | Shaft | 30.000 | 1 | bout rond | |
| L04/010 | Ø 10 x 15 | 80 | 28.000 | 50 | bout rond | |
| L04/011 | Ø 10 x 15 | 150 | 28.000 | 50 | bout rond | |
| L04/012 | Ø 3 | Shaft | 28.000 | 1 | bout rond | |
| L04/020 | Ø 16 x 26 | 80 | 25.000 | 50 | bout rond | |
| L04/021 | Ø 16 x 26 | 150 | 25.000 | 50 | bout rond | |
| L04/022 | Ø 3 | Shaft | 25.000 | 1 | bout rond | |
| L04/027 | Ø 5 x 11 | 80 | 30.000 | 50 | Sharp end | |
| L04/028 | Ø 5 x 11 | 150 | 30.000 | 50 | Sharp end | |
| L04/029 | Ø 3 | Shaft | 30.000 | 1 | Sharp end | |
| L04/031 | Ø 10 x 15 | 80 | 28.000 | 50 | Sharp end | |
| L04/032 | Ø 10 x 15 | 150 | 28.000 | 50 | Sharp end | |
| L04/034 | Ø 3 | Shaft | 28.000 | 1 | Sharp end | |
| L04/041 | Ø 16 x 26 | 80 | 25.000 | 50 | Sharp end | |
| L04/042 | Ø 16 x 26 | 150 | 25.000 | 50 | Sharp end | |
| L04/044 | Ø 3 | Shaft | 25.000 | 1 | Sharp end | |
| L04/071 | Ø 8 x 85 | 80 | 18.000 | 25 | bout cônique | |
| L04/072 | Ø 8 x 85 | 150 | 18.000 | 25 | bout cônique | |
| L04/074 | Ø 6 | Shaft | 18.000 | 1 | bout cônique | |
| L04/083 | Ø 18 x 85 | 80 | 20.000 | 25 | bout cônique | |
| L04/084 | Ø 18 x 85 | 150 | 20.000 | 25 | bout cônique | |
| L04/086 | Ø 6 | Shaft | 20.000 | 1 | bout cônique |
