Diamond Grinding Wheel on shaft
Diamant is used for the rectification of:
- tungsten carbide
- carbon
- graphite
- ferroceramic
- glass
- reinforced plastic
- quartz and steel
- super-alloys of more than 60 RC.
between 15 and 30 m/sec. following the possibilities of your equipment.
Lubrication:
always preferable to increause the service life, the cutting capacity and the state of the surface.
Grits:
Lubrication:
always preferable to increause the service life, the cutting capacity and the state of the surface.
Grits:
- 064: grits of 63 up to 53 microns
- 070: grits of 69 up to 58 microns
- 100: grits of 98 up to 88 microns
- 107: grits of 106 up to 90 microns
uniformly divided and fixed by a layer of nickel.
Diamant Grinding Wheels on shaft - Cylinder
| Article Nb. | Dimensions (mm) | Ø shaft (mm) | Grid | Min. Qty | |
|---|---|---|---|---|---|
| N03/011 | Ø 1 x 4 | 3 | D64 fine | 1 | |
| N03/021 | Ø 2 x 4 | 3 | D64 fine | 1 | |
| N03/030 | Ø 3 x 5 | 3 | D107 medium | 1 | |
| N03/031 | Ø 3 x 5 | 3 | D64 fine | 1 | |
| N03/050 | Ø 5 x 6 | 6 | D107 medium | 1 | |
| N03/051 | Ø 5 x 6 | 6 | D64 fine | 1 | |
| N03/060 | Ø 6 x 6 | 6 | D107 medium | 1 | |
| N03/061 | Ø 6 x 6 | 6 | D64 fine | 1 | |
| N03/080 | Ø 8 x 8 | 6 | D107 medium | 1 | |
| N03/081 | Ø 8 x 8 | 6 | D64 fine | 1 | |
| N03/100 | Ø 10 x 8 | 6 | D107 medium | 1 | |
| N03/101 | Ø 10 x 8 | 6 | D64 fine | 1 | |
| N03/120 | Ø 12 x 8 | 6 | D107 medium | 1 | |
| N03/121 | Ø 12 x 8 | 6 | D64 fine | 1 |
Diamond Grinding Wheel on shaft - Bowl shape
Meule diamantée sur tige pour percer ou découper le polyester avec meuleuse rapide ou défonceuse
| Article Nb. | Dimensions Ø x Lg. (mm) | Grid | Shape | Min. Qty | |
|---|---|---|---|---|---|
| N03/400 | Ø 3 x 15 / 60 | Coarse | Cylindrical with rounded top | 1 |
