Cylinder-Brush of very small diameter
Nettoyage, enlèvement de dépôts dans toute tuyauterie, canalisation, etc.
Service d'entretien, industries chimiques, alimentaires, pharmaceutiques, laboratoires, systèmes de refroidissement, etc.
Ebavurage d'alésages, profilés, etc.
Utilisation sur foreuse à 2.000 t/min. maximum.
-
Du Ø 4,5 à 8 mm: longueur totale 175 mm, longueur garnie 40 mm.
-
Du Ø 10 à 65 mm: longueur totale 320 mm, longueur garnie 100 mm.
-
Âme en fil d'acier.
For active cleaning and deburring of bores, pipes and tubes, gas pipes in very small diameters.
Brushes in small diameters - Stainless Steel
| Article Nb. | Ø covered length (mm) | Covered length (mm) | Total length (mm) | Ø shaft (mm) | Material | Ø wire (mm) | Min. Qty | |
|---|---|---|---|---|---|---|---|---|
| G19/210 | 1 | 16 | 75 | 0.4 | Stainless steel | 0.05 | 6 | |
| G19/215 | 1.5 | 16 | 75 | 0.66 | Stainless steel | 0.05 | 6 | |
| G19/220 | 2 | 20 | 75 | 0.66 | Stainless steel | 0.08 | 6 | |
| G19/225 | 2.5 | 20 | 75 | 1.10 | Stainless steel | 0.08 | 6 | |
| G19/230 | 3 | 25 | 75 | 1.40 | Stainless steel | 0.08 | 6 | |
| G19/235 | 3.5 | 25 | 75 | 1.40 | Stainless steel | 0.08 | 6 | |
| G19/240 | 4 | 25 | 75 | 1.40 | Stainless steel | 0.08 | 6 | |
| G19/245 | 4.5 | 25 | 125 | 1.80 | Stainless steel | 0.08 | 6 | |
| G19/250 | 5 | 25 | 125 | 1.80 | Stainless steel | 0.08 | 6 | |
| G19/255 | 5.5 | 25 | 125 | 2.80 | Stainless steel | 0.08 | 6 | |
| G19/260 | 6 | 25 | 125 | 2.80 | Stainless steel | 0.08 | 6 | |
| G19/265 | 6.5 | 25 | 125 | 2.80 | Stainless steel | 0.08 | 6 |
Brushes in small diameters - Nylon
| Article Nb. | Ø lg. couverte (mm) | Covered length (mm) | Total length (mm) | Ht. tige (mm) | Material | Ø wire (mm) | Min. Qty | |
|---|---|---|---|---|---|---|---|---|
| G19/411 | 1 | 16 | 125 | 0,4 | Nylon | AO 1000 | 6 | |
| G19/416 | 1.5 | 16 | 125 | 0.66 | Nylon | AO 1000 | 6 | |
| G19/421 | 2 | 20 | 125 | 0.66 | Nylon | AO 1000 | 6 | |
| G19/426 | 2.5 | 20 | 125 | 1.10 | Nylon | AO 1000 | 6 | |
| G19/431 | 3 | 25 | 125 | 1.40 | Nylon | AO 600 | 6 | |
| G19/436 | 3.5 | 25 | 125 | 1.40 | Nylon | AO 600 | 6 | |
| G19/441 | 4 | 25 | 125 | 1.40 | Nylon | AO 600 | 6 | |
| G19/446 | 4.5 | 25 | 125 | 1.80 | Nylon | AO 600 | 6 | |
| G19/451 | 5 | 25 | 125 | 1.80 | Nylon | AO 600 | 6 | |
| G19/456 | 5.5 | 25 | 125 | 2.80 | Nylon | AO 600 | 6 | |
| G19/461 | 6 | 25 | 125 | 2.80 | Nylon | AO 600 | 6 | |
| G19/466 | 6.5 | 25 | 125 | 2.80 | Nylon | AO 600 | 6 |
